Although MAX Molded Pulp use the most high technology to produce the egg tray manufacturing system, we also pay attention to the simple operating system for operator. Our system will take few hours from setting up to operate. We believe that basic working principle contributes you to understand our equipment working procedures.
In the beginning, there is a hydraulic pulp unit which collect and blend all the waste paper, carton and boxes with clean water. The hydraulic pulp machine mainly produces the raw pulp slurry with some solids, debris and other unexpected particles. Secondly, Acorn vibration screen is capable of separating those unexpected solids and purify the pulp slurry.Shaker screen will obviously reduce the fiber bundles and lumps of pulped. The purified pulp slurry will flow the pulp pool which will mix the pulp slurry with other chemical to do further process. In the pulp pool, the agitator will fully mix pulp slurry with chemical to obtain the expected slurry. Subsequently, the processed pulp slurry will be pumped into the moulding machine to form the wet production.MAX Molded Pulp unique vacuum system absorb the 1% content of fiber in the pulp pool and deposit on the forming screen to get egg tray, boxes or carton. However, the rest of water is drawn by the screen and drainage holes.
The drying system is going to heat the semi-finish productions to complete production. According to the production efficiency, our engineer could customize the length of drying unit to meet with customer’s expectation. On the other hand, our stacking and packing automatic table can immediately and quickly gather them into a bundle.
High technology system and simple operating system could bring you a heap of convenient. We believe that MAX Molded Pulp is your best choice for your egg tray production. Please feel free to contact with http://www.maxmoldedpulp.com/
No comments:
Post a Comment